Fretz Tube Flaring Tool Set for Bead Spacers
The Tube Flaring Tools are made up of four parts. There are three split Tube Flaring Mandrels, TFM-1, TFM-2 and TFM-3 for holding cut pieces of tubing of various sizes.
The mandrels are held upright in the Tube Flaring Base, TFB-1 to make the flaring process accurate and easy.
An annealed cut piece of seamless tubing is placed between the two parts of a split mandrel and flared by striking with a stamping hammer. Many variations are possible by changing the length, width and gauge of the tubing, and then texturing with hammers if desired.
It is important to use the largest size split mandrel possible with the chosen tubing diameter.
The size range of sterling tubing to be used is 3.5-7mm inside diameter with this set.
The set includes:
- A Wood Holder
- TFM-1 for Tubing with an Inside Diameter of 3.5mm 4.4mm
- TFM-2 for Tubing with an Inside Diameter of 4.5mm-5.9mm
- TFM-3 for Tubing with an Inside Diameter of 6mm-7mm
- TFB-1 Tube Flaring Base
Please note that the hammer is not included in this set and is for display purposes only